Comparison of metabolic nitramine degradation by denitrifying species

The biodegradation of two popular nitramine energetics were investigated. The HMX (octa‐hydro‐1,3,5,7‐tetranitro‐1,3,5,7‐tetrazocine) was mineralized by anaerobic mixed denitrifiers in digested sewage sludge culture. An initial HMX concentration of 120 mg/L decreased to a non‐detectable level (> 99% removal efficiency) in 8 days of incubation under strict anaerobic conditions. It was, however, not effectively metabolized by single denitrifying species, P. aeruginosa, B. subtilis in a nitrogen limiting condition under their optimum growth conditions. The other nitramine energetic, ADN (ammonium dinitramide), was mineralized well in the anaerobic mixed culture. The initial ADN concentration of 250 mg/L was reduced to non‐detectable levels (> 99% removal efficiency) in 5 days of incubation under anaerobic conditions. These results show that the anaerobic mixed culture, compared to the pure monoculture, is superior in the degradation of nitramine energetics.     

Behavior of particulate matter during high concentration episodes in Seoul

The behavior of particulate matter (PM) during high-concentration episodes was investigated using monitoring data from Guui station, a comprehensive air monitoring station in Seoul, Korea, from January 2008 to March 2010. Five non-Asian dust (ND) episodes and two Asian dust (AD) episodes of high PM concentrations were selected for the study. During the ND episode, primary air pollutants accumulated due to low wind speeds, and PM_2.5 increased along with most other air pollutants. Particles larger than PM_2.5 were also high since these particles were generated by vehicular traffic rather than wind erosion. During strong AD episodes, PM_10–2.5 primarily increased and gaseous primary air pollutants decreased under high wind speeds. However, even during the AD episode, PM_2.5 and gaseous primary air pollutants increased when the effects of AD were weak and wind speeds were low. This study corroborates that accumulation of air pollutants due to a drop in surface wind speed plays an important role in short-term high-concentration occurrences. However, low wind speeds could not be directly linked to local emissions because a significant portion of accumulated air pollutants resulted from long-range transport.     

PCB 77 dechlorination products modulate pro-inflammatory events in vascular endothelial cells

Persistent organic pollutants such as polychlorinated biphenyls (PCBs) are associated with detrimental health outcomes including cardiovascular diseases. Remediation of these compounds is a critical component of environmental policy. Although remediation efforts aim to completely remove toxicants, little is known about the effects of potential remediation byproducts. We previously published that Fe/Pd nanoparticles effectively dechlorinate PCB 77 to biphenyl, thus eliminating PCB-induced endothelial dysfunction using primary vascular endothelial cells. Herein, we analyzed the toxic effects of PCB congener mixtures (representative mixtures of commercial PCBs based on previous dechlorination data) produced at multiple time points during the dechlorination of PCB 77 to biphenyl. Compared with pure PCB 77, exposing endothelial cells to lower chlorinated PCB byproducts led to improved cellular viability, decreased superoxide production, and decreased nuclear factor kappa B activation based on duration of remediation. Presence of the parent compound, PCB 77, led to significant increases in mRNA and protein inflammatory marker expression. These data implicate that PCB dechlorination reduces biological toxicity to vascular endothelial cells.     

Application of powdered activated carbon coating to fabrics in a hybrid filter to enhance mercury removal

Elemental mercury(Hg0) is predominant constituent of flue gas emitted from coal-fired power plants. Adsorption has been considered the best available technology for removal of Hg0 from flue gas. However, adsorbent injection increases the amount of ash generated. In the present study, powdered activated carbon(PAC) was coated on polytetrafluoroethylene/glass fiber filters to increase Hg0 removal while concurrently reducing the amount of ash generated. The optimal PAC coating rate was determined in laboratory experiments to ensure better Hg0 removal with low pressure drop. When PAC of particle size less than 45 μm was used, and the areal density was 50 g/m2, the pressure drop remained under 30 Pa while the Hg0 removal efficiency increased to 15.8% from4.3%. The Hg0 removal efficiency also increased with decrease in filtration velocity. The optimal PAC coating rate was applied on a hybrid filter(HF), which was combined with a bag filter and an electrostatic precipitator in a single chamber. Originally designed to remove fine particulates matter, it was retrofitted to the flue gas control device for simultaneous Hg0 removal. By employing the PAC coating, the Hg removal efficiency of the HF increased to 79.79% from 66.35%. Also, a temporary reduction in Hg removal was seen but this was resolved following a cleaning cycle in which the dust layer was removed.     

Effect of preparation method of noble metal supported catalyts on formaldehyde oxidation at room temperature: Gas or liquid phase reduction

Formaldehyde (HCHO) is toxic to the human body and is one of the main threats to the indoor air quality (IAQ). As such, the removal of HCHO is imperative to improving the IAQ, whereby the most useful method to effectively remove HCHO at room temperature is catalytic oxidation. This review discusses catalysts for HCHO room-temperature oxidation, which are categorized according to their preparation methods, i.e., gas-phase reduction and liquid-phase reduction methods. The HCHO oxidation performances, structural features, and reaction mechanisms of the different catalysts are discussed, and directions for future research on catalytic oxidation are reviewed.     

Evaluation of a Three‐Dimensional Hydrodynamic Model Applied to Chesapeake Bay Through Long‐Term Simulation of Transport Processes

A numerical model, the Curvilinear Hydrodynamics in 3‐Dimensions, Waterway Experiment Station version (CH3D‐WES), was applied to represent transport processes of the Chesapeake Bay. Grid resolution and spatial coverage, tied with realistic bathymetry, ensured dynamic responses along the channel and near the shoreline. The model was run with the forcing ranges from high frequency astronomical tides to lower frequency meteorological forcing, given by surface wind and heat flux, as well as hydrological forcing given by fresh water inflows both from upstream and distributed sources along the shoreline. To validate the model, a long‐term simulation over seven‐year time period between 1994 and 2000 was performed. The model results were compared with existing observation data including water level time series, which spans over a wide spectrum of time scales, and long‐term variations in salinity structures over varying parts of the Bay. The validated model is set to provide an appropriate transport mechanism to the water quality model through linkage, warranting that the model takes into account the complexity in time and spatial scales associated with the dynamic processes in the Chesapeake.     

Investigation of heavy metal accumulation in Polygonum thunbergii for phytoextraction

In this study, cadmium (II), lead (II), copper (II) and zinc (II) were determined in Polygonum thunbergii and soil from the Mankyung River watershed, Korea. Soil samples contained detectable lead (<17.5 g g(-1)), copper (<8.4 g g(-1)) and zinc (<24.5 g g(-1)), whereas cadmium was undetectable. Whole plants of P. thunbergii contained detectable lead (<320.8 g g(-1)), copper (<863.2 g g(-1)) and zinc (<2427.3 g g(-1)), whereas cadmium was detectable only in the stem (<7.4 g g(-1)) and root (<10.1 g g(-1)). Whole plant concentrations were very different for each metal, particularly in the case of zinc. The mean content of heavy metal in the whole plants increased in the order of cadmium (8.5 g g(-1))相似文献   

Using aliphatic alcohols as gaseous tracers in determination of water contents and air-water interfacial areas in unsaturated sands

A new type of gaseous tracer utilizing nontoxic aliphatic alcohols for the determination of water content and air-water interfacial area is tested on unsaturated sands of low water content. Alcohol vapors are generated at room temperature and passed through the experimental sand column. Breakthrough curves (BTCs) of these vapors are obtained by monitoring their effluent concentrations using GC-FID. The retardation factor with respect to each vapor transport process is obtained by optimizing BTCs data using the CXTFIT program in the reverse problem mode. The water content and the interfacial area are subsequently calculated from their retardation factors by both equilibrium and nonequilibrium transport models. Experimental results indicate that the pentanol tracer is feasible in the determination of water content at conditions when the degree of water saturation is low. In the determination of air-water interfacial area, decanol is selected due to its interfacial adsorption characteristics. By comparing to interfacial areas from theoretical predictions as well as other conventional tarcer methods, the ones determined from the decanol tracer tests are found to be close to the true interfacial areas when the water content is low.